Probably not the right section, but here it goes,
I am needing a cad file of a Commando knife. I need to make this fill scale. just the knife blade. 6.5 inches long. The trick is I need to have the 7 degree angle on the top and bottom of the blade. Going from the tang to the point. My current cad software will not allow me to do this.
Im hoping someone has something close already drawn up that they wouldnt mind sharing. I have to cut it in wax for casting in silver.
Thread: Knife makers please look
Results 1 to 1 of 1
-
02-12-2011, 06:53 PM #1
Registered
- Join Date
- Jul 2006
- Posts
- 887
Knife makers please look
Reply With QuoteSimilar Threads
-
Jewelry Makers and CNC
By cncadmin in forum Uncategorised MetalWorking MachinesReplies: 32Last Post: 11-10-2014, 10:04 PM -
Knife Engraving On a Ka-Bar Military Knife
By CNC602 in forum VideosReplies: 0Last Post: 12-22-2009, 09:40 PM -
PCB Makers
By arizonavideo in forum DIY CNC Router Table MachinesReplies: 1Last Post: 08-27-2008, 08:13 PM -
From the Makers of Rogaine!
By Switcher in forum RC Robotics and Autonomous RobotsReplies: 2Last Post: 01-30-2007, 01:31 PM
Posting Permissions
