Hi
I am using Mach 3 turn on my Lathe. Could anyone suggest a suitable CAM software to produce toolpaths for Mach 3 Turn?
I have Mastercam but there is no post processor available for Mach.
Thanks in advance.
Hi
I am using Mach 3 turn on my Lathe. Could anyone suggest a suitable CAM software to produce toolpaths for Mach 3 Turn?
I have Mastercam but there is no post processor available for Mach.
Thanks in advance.
check out dolphin cam.
I agree with the poster above. Take a look at Dolphin cad cam.
Try LazyTurn, it's free at the ArtSoft USA - Home of Mach3 and LazyCam
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I use bobcad/cam V23, It works good for me! I had to edit the post myself to get it the way I wanted, which I think was easy