I've got gecko g201 drivers and checking the manual it says that the minimum step pulse "0" time os 0.5 uS , minimum step pulse "1" time is 4uS and the direction setup is 1uS with a 20uS min hold time after step edge.
Could anyone tell me the correct way of calculating the values to put into the motor tuning tab in mach3? its running at 2 and 2 at the mo. I can't find artsofts definition of the terms they use in relation to the values i have.
Does the Mach3 step pulse value refer to the "0" time, the "1" time or a function of them both?
Should the Mach3 dir pulse value be 1uS or does the additional 20uS hold time figure somehow in the calculation
thanks