Anyone know what these black lines in SC represent? This should be a simple pocketing op, but it creates the circles in the black marks in the part.
Thread: Pocketing Problem
Results 1 to 3 of 3
-
02-26-2011, 06:00 PM #1
Registered
- Join Date
- Mar 2010
- Posts
- 0
Pocketing Problem
-
02-27-2011, 12:42 AM #2
Registered
- Join Date
- Oct 2004
- Posts
- 159
AFAIK it's just an artifact of the graphics processor in Sprut from the cutter representation and the tool path. I don't think it's anything to be concerned about.
-
02-27-2011, 12:51 AM #3
Registered
- Join Date
- Mar 2010
- Posts
- 0
The line in the middle is actually where the cutter does not completely machine down the part. It's also that way in the final part. But since I am machining that area away it;s not a big deal, just nice to know what it means.
Reply With QuoteSimilar Threads
-
Island Pocketing Problem
By grandpa jay in forum CamBamReplies: 4Last Post: 01-05-2011, 04:42 PM -
help with pocketing on MCX
By genexis in forum MastercamReplies: 9Last Post: 06-29-2007, 04:35 PM -
2.5D pocketing rapid problem
By mayhugh1 in forum SprutCAMReplies: 3Last Post: 11-02-2006, 08:58 AM -
Pocketing
By cncadmin in forum Uncategorised CAM DiscussionReplies: 5Last Post: 05-12-2006, 02:44 AM -
Accuracy problem with pocketing
By cncadmin in forum CNC (Mill / Lathe) Control Software (NC)Replies: 3Last Post: 10-05-2004, 05:23 AM
Posting Permissions
