I am using NC net lite to communicate with my controls (or trying to ) :-). I have set all the parameters to the specs from Cadem, but when I send a program to the computer all I see is a bunch of jibberish. Try to send it back and get an error code of 33. I am using a null modem cable with the pinout that is specified for it. Anyone have any Idea what I am doing wrong?? I would sure appreciate some help.
Thanks
Kyle
Results 1 to 3 of 3
-
02-26-2011, 07:27 PM #1
Registered
- Join Date
- Jan 2011
- Posts
- 0
PC to Anilam Crusader II L- NCnet lite
-
04-06-2011, 06:22 PM #2
Registered
- Join Date
- May 2008
- Posts
- 7
Hi,
try this cable
-
04-08-2011, 01:50 AM #3
Registered
- Join Date
- Mar 2011
- Posts
- 67
There are 2 more codes for the Anilam that are not in the manual.
Aux 2754 sets up transmission for EIA character set.
Aux 2758 sets it up for ASCII.
I think you want ASCII. Try keying that in before Aux 2700, 2701 or 2702 to actually send or receive the program.
Hope that helps.
Reply With QuoteSimilar Threads
-
PC parameter settings with NCnet Lite
By 57chevy in forum CNC (Mill / Lathe) Control Software (NC)Replies: 6Last Post: 10-15-2012, 04:56 PM -
Problem with NCnet Lite....
By gearsoup in forum CNC (Mill / Lathe) Control Software (NC)Replies: 4Last Post: 06-24-2011, 06:29 PM -
Ncnet Lite
By katsbobo in forum CNC (Mill / Lathe) Control Software (NC)Replies: 25Last Post: 02-28-2011, 11:24 PM -
Ncnet lite Okuma 500l-g
By roger_e in forum DNC Problems and SolutionsReplies: 3Last Post: 05-29-2010, 12:32 AM -
ncnet lite
By krustykrab in forum DNC Problems and SolutionsReplies: 5Last Post: 02-10-2010, 08:15 AM
Posting Permissions
