My shop is considering the purchase of two new Cutex 160's. We have some questions and would greatly appreciate any help.
How rigid is the tailstock? We machine a ton of Zirconium and Stainless between centers and need to hold tolerances to less than .0005. Chatter is also a big concern. What are your experiences?
How long have you owned your Cutex? any mechanical issues or breakdown?
If you were buying today would you recommend the Cutex?
Lastly, my shop currently owns Mori SL15's (from the 80's!) Mori NL's and Mazak Nexus 100's. We are looking at the Cutex as they are considerably cheaper. Are they worth it?
Results 1 to 2 of 2
-
03-02-2011, 03:55 PM #1
Registered
- Join Date
- Feb 2011
- Posts
- 0
ATTENTION: Hwacheon Cutex 160 owners...
-
10-02-2014, 09:42 PM #2
Registered
- Join Date
- Sep 2013
- Posts
- 37
Re: ATTENTION: Hwacheon Cutex 160 owners...
Did you ever purchase the Hwacheon? If so, I was wondering how it went. Can't find much on the net about Hwacheon.
Thanks!
Reply With QuoteSimilar Threads
-
ATTENTION! L. Sakthivel
By 600Service in forum Colchester Tornado lathesReplies: 3Last Post: 07-29-2011, 06:36 AM -
DIY CNC getting some attention
By Grunblau in forum DIY CNC Router Table MachinesReplies: 2Last Post: 12-14-2009, 11:39 PM -
Hwacheon Cutex 240 good or bad??
By .xXACEXx. in forum Uncategorised MetalWorking MachinesReplies: 7Last Post: 03-19-2009, 10:44 PM -
Attention CT129 Owners + Help Needed
By JaxxMan in forum Benchtop MachinesReplies: 6Last Post: 01-28-2009, 07:11 PM -
Attention: Mazak 510C owners
By Steve Manthey in forum SurfcamReplies: 0Last Post: 01-12-2009, 04:25 AM
Posting Permissions
