The company I work for recently relocated to a new facility, and our Hurco VMX 50 S was brought along for the ride. Long story short, it has been reset to factory settings and had some limit switch issues that have been resolved. I can run programs just fine in conversational mode, but when trying to send programs from Powermill to the Hurco via ws ftp pro, the computer will not connect. I am pretty new at this, but I know the previous guy in my position was able to run it, and I was also able to do it until everything was reset. How would I go about setting this back up? I've gone thru the Hurco manuals but have not found anything that has worked yet.

Thanks,

Ephraim

edit: the ethernet cable connected to the machine works, I tried it on another network, but when connecting to the hurco, windows gives the "limited or no connectivity" warning sign. and the error given by the ftp software is:

Connecting to 172.16.2.6:21
Connected to 172.16.2.6:21 in 0.015626 seconds, Waiting for Server Response
Error reading response from server.
Connection closed by remote host.
Host type (1): Automatic detect



thanks everyone.