Good morning.
I need some help! I am setting this Mazak QTN350MY nexus controller what i traying to do is run a main program and add a subprogram at the end of the main program.
This the way i have rigth now
m1
m98 p1201
%
this is the end of my main program
I start the machine at the end of the main program to see if goes to the subprogram but is going to the begining of the main program again
Results 1 to 3 of 3
-
03-15-2011, 01:35 PM #1
Registered
- Join Date
- Mar 2011
- Posts
- 4
how to run a subprogran on a mazak
-
03-15-2011, 02:14 PM #2
Registered
- Join Date
- Jul 2010
- Posts
- 0
If you have a % symbol at the beginning of the program, try deleting it and see if that works. Your g code is correct.
-
03-15-2011, 04:59 PM #3
Registered
- Join Date
- Mar 2011
- Posts
- 4
I don't have any % symbol on the beginning of the program
Reply With QuoteSimilar Threads
-
Mazak QT-10 T2 manuals --acct w/ mazak?
By CDTINC in forum Mazak, Mitsubishi, MazatrolReplies: 4Last Post: 09-21-2012, 05:09 AM -
about mazak TMC need help
By sumangal in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 08-30-2010, 06:28 AM -
Mazak 6pc with machine Mazak 400n
By anva in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 08-17-2010, 08:30 AM -
Mazak
By dario0305 in forum CNC Machining CentersReplies: 0Last Post: 05-14-2010, 09:34 AM -
Mazak QT-200,Mazak VTC-160A,Mazak FJV-250 all pcb problem
By sting_dot in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 05-22-2007, 02:20 AM
Posting Permissions
