Hi guys.
i searched and searched and nothing come up for this one. I would really appreciate if someone here could give me a hint how to get post processor for mastercam x for heidenhain control for facing head ld650, or any turning post processor for heidenhain control.
Thanks in advance..
Ben
Results 1 to 8 of 8
-
03-19-2011, 01:24 AM #1
Registered
- Join Date
- Mar 2011
- Posts
- 0
heidenhain post for tos facing head
-
03-20-2011, 03:10 PM #2
Banned
- Join Date
- Jan 2008
- Posts
- 73
Re:mastercam POST
Try to find from JeffCNC
Originally Posted by ben82
-
03-22-2011, 07:29 AM #3
Registered
- Join Date
- Mar 2011
- Posts
- 0
NO LUCK
-
03-22-2011, 01:02 PM #4
Member
- Join Date
- Feb 2011
- Posts
- 10
Re: MasterCAM POST
In MasterCAM POST Center Originally Posted by ben82
-
03-27-2011, 08:07 PM #5
Registered
- Join Date
- Dec 2004
- Posts
- 44
I went and did not find anything, May be you clarify how to find right post there
-
03-27-2011, 10:43 PM #6
Member
- Join Date
- Feb 2011
- Posts
- 10
Re:POST
You need sign in first, and then go "download center" - "mastercam download center", you will find "MasterCAM POST Center" on the bottom. Originally Posted by ak762
If you have any problem, you can post your question on JeffCNC MasterCAM Forum , I will help you there.
-
03-28-2011, 09:56 PM #7
Registered
- Join Date
- Dec 2004
- Posts
- 44
OK, Originally Posted by ben82
I found but I doubt it can help to topic starter. It is mill post ver9
-
03-31-2011, 06:47 AM #8
Registered
- Join Date
- Mar 2011
- Posts
- 0
yep i found it too but its a post for milling and i need a turning post.ANYONE??!!
Reply With QuoteSimilar Threads
-
Heidenhain post
By Jaswin in forum Post ProcessorsReplies: 0Last Post: 12-03-2008, 06:35 PM -
Facing head
By Cyclotronguy in forum Want To Buy...Need help!Replies: 1Last Post: 04-19-2008, 04:47 AM -
Heidenhain post??
By lrupe in forum Post Processors for MCReplies: 1Last Post: 09-02-2007, 02:20 AM
Posting Permissions
