I am trying to program a camshaft using using a rotary axis contour but not having much luck with the results. The image I found online is an example of what I am trying to accomplish. I am using X4 MU3, rotating about X axis and the other image shows the path in light blue from the right side view which is wrong. Is this even possible? Thanks for any help that y'all can provide. Peace.
Thread: Cylindrical Camshaft
Results 1 to 2 of 2
-
03-19-2011, 03:13 PM #1
Registered
- Join Date
- Jul 2005
- Posts
- 42
Cylindrical Camshaft
-
03-20-2011, 12:38 AM #2
Registered
- Join Date
- Jun 2005
- Posts
- 305
I think what you're seeing is the allowance for the tool radius.
I base this on the "error" being on the x- side.ObrienDave. MasterCam since V6. Gcode since 1983.
The nose you punch today may belong to the butt you have to kiss tomorrow.
Reply With QuoteSimilar Threads
-
Camshaft design
By M-man in forum I.C. EnginesReplies: 64Last Post: 06-09-2012, 08:08 AM -
camshaft
By chrispare in forum I.C. EnginesReplies: 5Last Post: 10-28-2010, 09:40 PM -
Camshaft doctor
By AirChunk in forum I.C. EnginesReplies: 79Last Post: 09-15-2010, 04:50 AM -
Camshaft digitalizer
By Jonne in forum News AnnouncementsReplies: 0Last Post: 07-28-2010, 11:26 AM -
CNC Camshaft Grinder
By kiwiavi in forum MetalWork DiscussionReplies: 1Last Post: 09-29-2008, 08:06 PM
Posting Permissions
