586,974 active members*
3,493 visitors online*
Register for free
Login

Thread: Crash Prevention

Results 1 to 7 of 7

Hybrid View

  1. 03-22-2011, 10:54 PM #1
    Tennessee
    Tennessee is offline Registered
    Join Date
    Dec 2009
    Posts
    28
    I have had the same scenario and tried a few things to fix it before finally just having them run the first op on all parts then the second. The chuck needed to be clean before running second side so really didnt add time to the job grabbing another part.
    Reply With Quote Reply With Quote
  2. 03-23-2011, 01:22 AM #2
    budgieW
    budgieW is offline Registered
    Join Date
    Jun 2008
    Posts
    372
    Maybe try

    N200 IF[VORD[1138] EQ 0]N200 (CHUCK CLOSED CHECK)
    (OPERATOR OPENS CHECK HERE)
    M00
    (THE OPERATOR NOW CLOSES THE CHUCK)
    N300 IF[VORD[1138] EQ 1]N300 (CHUCK OPEN CHECK)

    BLAH
    BLAH
    BLAH
    Reply With Quote Reply With Quote
  3. 03-23-2011, 01:41 PM #3
    OkumaWiz
    OkumaWiz is offline Registered
    Send a message via AIM to OkumaWiz
    Join Date
    Apr 2009
    Posts
    1262
    Use budgieW's chuck open command check to loop the program and keep it running until it sees the chuck open command. Once it sees it then go to your M0 command. that will prevent the cycle start from doing anything until it sees the chuck opened in the middle of the cycle.

    Best regards,
    Reply With Quote Reply With Quote
  4. 03-23-2011, 05:22 PM #4
    dws35
    dws35 is offline Registered
    Join Date
    May 2010
    Posts
    0

    Thanks

    Tip o' the hat to Okuma Wiz and BudgieW. Putting those 2 suggestions together gives me what I need to put together a plan.

    Thx again.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. burr prevention problem
    By langless28 in forum Material Machining Solutions
    Replies: 0
    Last Post: 07-16-2010, 05:08 PM
  2. Dechel Maho DMP60 - UVV (accident prevention regulations)
    By AllDone in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 1
    Last Post: 01-05-2010, 09:01 PM
  3. Rust prevention ?
    By jduke in forum Benchtop Machines
    Replies: 13
    Last Post: 07-20-2009, 09:21 PM
  4. suicide prevention help neede
    By endgrainguy in forum DIY CNC Router Table Machines
    Replies: 19
    Last Post: 05-25-2008, 06:50 PM
  5. rust prevention
    By coolman in forum MetalWork Discussion
    Replies: 2
    Last Post: 01-23-2005, 06:32 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules