Im starting to search for motors for my CNC. Im using 8020 and their linear teflon bearings. I know im going to need a motor that is fairly strong...Please give opinions on these 3 so I can have a general idea on what to look for.
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWA:IT
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWA:IT
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWA:IT
Thread: Ask The Pros
Results 1 to 4 of 4
-
08-12-2005, 08:25 PM #1
Registered
- Join Date
- Mar 2005
- Posts
- 65
Ask The Pros
-
08-12-2005, 08:30 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
What type and size machine? The first ones are probably a little small, the second ones (5 phase) are useless. The third depends on what type and size machine.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
08-12-2005, 08:33 PM #3
Registered
- Join Date
- Apr 2005
- Posts
- 421
You can get automation direct motors (276 oz/in) for about $39 + shipping.
-
08-12-2005, 08:33 PM #4
Registered
- Join Date
- Mar 2005
- Posts
- 65
Size
Its going to be a 24 x 24 table used mostly for cuting hardwoods and acrylic.
Reply With Quote
Posting Permissions
