Mach3 SolidCam files that I use.
4th axis that I mentioned earlier I don't have the owners permission to upload as he paid a lot for it.
Mach3 SolidCam files that I use.
4th axis that I mentioned earlier I don't have the owners permission to upload as he paid a lot for it.
Runar Holm, Norway
www.maxmekker.com
My humble offering, an Alphacam post for a Heidenhain 407 on a 3 axis mill. Good thread Claudiu!
Nice topic! I don't have any offerings yet but am looking for HwaCheon ECO 31/Fanuc18T for both Solicam Trial and BobCam full.
I need a post processor for a fadal cnc 32 mp control to use with bobcad v25.
thanks ,
Ernie
Hello everyone ,
i need a post processor for the machine of type johnford sl-40.
can anyone help?
Hello, I am running a laguna swift and am looking for an alphacam post for laguna swift, thank you for reading. Cheers!
my humble request to post a post processor for fanuc 6m
Hello, I need post MAstercam2018 for TNC410 can someone help me
Does anyone have a Holz-Her Dynestic 7535 post?
hi everyone
i have sodick A530D EX21 ,
when i turn the machine ,it give me error E229 .anybody know what is this ?
Hello everyone, I am new to this forum.
I have a post process question for WorkNC. I am in need of making my post processor post tapping cycles.
I will post a non edited file that come straight from the WorkNC that does not even work on my machine and one that I edited to use G84 that works correctly.
So what I am looking for is to try to edit my post to come out with the G84 and the points of the holes.
Can anyone help me with this?
Thanks
greetings
Have you solved the problem ?
if not, send me the pp by email to [email protected], with some details, controller type or special specs for threading if needded.
hi do anyone has a post processor for millplus dv400 solidcam
I have one but it does not support tcp
looked in the machine parameters the tcp is unlockd
the machine is a dmu 50 2000y.
Hi it has been a while since this post, but can you upload this post?
Thank you
Biesse rover B 4.40
SCM Xilog3
Biesse skill
I'm looking for a post processor for Burny Phantom. I am using MasterCAM X8.
Thank you.
Haas TL 3 W