Getting an Air-Hot alarm when connecting my HRT-210 (brush) to the servo controller (red brush style controller) Unit is cold has not run in days. Has 85 psi CDA going to the unit. HRT-210 will run fine when connected to a different servo controller. Is there a parameter inside the servo controller I am missing? Any ideas?
Jason
Results 1 to 7 of 7
Threaded View
-
03-31-2011, 02:00 AM #1
Registered
- Join Date
- Feb 2009
- Posts
- 40
Haas servo controller Air-Hot alarm
Reply With QuoteSimilar Threads
-
Mori cl-150 msc-803 controller s01 servo alarm
By TBordelon in forum Mori Seiki lathesReplies: 5Last Post: 07-09-2013, 11:24 PM -
ALARM shuttle drawbar alarm haas
By timmydabull in forum Haas MillsReplies: 28Last Post: 02-18-2013, 07:47 PM -
HAAS VF-2 (104 ALARM) Y SERVO ERROR TOO LARGE
By joanpim in forum Haas MillsReplies: 3Last Post: 09-12-2011, 10:24 AM -
alarm 105 (z servo error toll large) on Haas VF-OE
By hoi.le in forum Haas MillsReplies: 4Last Post: 08-12-2008, 11:01 AM
Tags for this Thread
Posting Permissions
