[ecapatto]

Hello all,

I'm facing some problems with some in-built cycles on 840D that seems to be enchripted, the blocks starts with @> and just a few commands are readable.

Do you guys know how can I translate the programs to a readable code or give me some informations about the codification.

Some parts of the code seems like to be the older 840D with @100 functions but the rest I just can't read.

Thanks by the advance

[ecapatto]

Somebody can help me with it?

[tanvon]

hi, sinumerik 840D is a advance control, which has lot of built in cycles, and understanding them through reading the code is not easy. There are documentations available from siemens webiste as well, but I will not recommend you wast time. But you can make your own cycles but again it is an advance topic. I have a cnc blog there you might find some useful sinumerik 840D posts that might help you

[ShawJohn]

Sounds like a corrupt file to me. Delete and reinstate cycle/program and try again