I need to Change the drill cycle to suit my machine But it is not working out. Here Is what I need the drill cycle to look like
P01 -.125 P02 -.500 P03 -.050 P04 1 P05 30
P01 = r plane has to be a negative
P02 = total hole depth also negative (zdepth?)
p03 = peck amaount also negative ( vbite?)
p04 = dwell time in seconds
p05 = feedrate no decimal 30 = 3.0 ipm
This is a peck cycle G83 on my machine. For a regular drill with no peck
the P03 need to be the same as P02.
any help would be appreciated
Thanks
Marcus