Hello everyone,
I work with CNC machines, and from a whyle I must program a SELCA S4000, and I do not have a Post processor for SolidCam, please, need help.
EMERGENCY!
Hello everyone,
I work with CNC machines, and from a whyle I must program a SELCA S4000, and I do not have a Post processor for SolidCam, please, need help.
EMERGENCY!
So, there is nobody that can give me this post processor.
Then I started to make it by myself.
I have one problem, I must to generate something like this:
G20X...Y...I...
The promblem is that after "I" i must generate the arc radius or diameter/2.
What is the formula? i tryed arc_radius, arc_diameter circle_radius, cirlce_diameter, and none of thous did not works.
Please need help.
Thanks!
Can anybody help me?
Still waiting!
Originally Posted by claudiu220405
Hello everyone,
I work with CNC machines, and from a whyle I must program a SELCA S4000, and I do not have a Post processor for SolidCam, please, need help.
EMERGENCY!
I can with your help fast that you do postprocessor [email protected]