[syil]

We present new 2011 X series model.

x4/x5

here it is some key update specification:
-Precision high-speed 5,000 rpm spindle, NSK spindle bearings,Industry spindle offer NT30/R8 type
-7.0Nm AC variable frequency motor drive with Delta VFD-High torque stepper motor 3 axis
-Integrated casting base (optional), to further increase the stability of machine tools

- X-axis stepper motor: 6.0Nm
- Y-axis stepper motor: 6.0Nm
- Z axis stepper motor: 7.0Nm
- New wide column,with casting stands more stable of machines.

frequency motor and Delta VFD both taiwan Brand.

x6/x6 Linear/x7 Linear

-5000 Switch to precision high-speed spindle, NSK spindle bearings,Industry Offer NT30/R8 type
-9.0Nm AC variable frequency motor drive with Delta VFD
-3 phase high torque stepper motor
-Integration of base casting
-Pre-installed automatic lubrication system to protect the rail life
-Optional Pneumatic Draw Bar System Immediately Provide Now.
- X-axis motor: 8.5Nm
- Y axis motor: 8.5Nm
- Z axis motor: 8.5Nm

Check some key items pictures.
All of Syil dealers around the world stocking 2011 model.

New model specification have been update to ww.Syil.com.cn english page
we are now in production,and exporting to dealers.

[syil]

Here it is some pictures of new x4/x5 series.
the key update it is Y axis motors move back,and use big torque stepper motors.
then make new casting of head and column.and offer casting stands.

we can use this new model cutting 2mm iron plate without shaking.new VFD and frequnce motors offer 7Nm torque.and make this 2 models more powerfully and regidlty

[syil]

We present 2011 model not mean we will drop 2010 models(only x4/x5 series left,x6/x6 linear/x7 linear will no longer have 2010 brushless edtion)

we still keep sales 2010 brushless motor model.with new drivers,
it is good quality and offer 3.5Nm spindle torque.
customer still can buy lower cost x4/x5 series with this package.

the quality issue of old board from syil dealers if in warranty time,we will free to change this new board too.

In this month,we will release T/S Series with prefessiaonl controller and servo package.

[syil]

Pneumatic Draw Bar System For x6 Linear/x7 Linear Series.

we are now mostly production those 2 model with draw bar.
Please check pic and price very reasonble.it is industry draw bar off NT30/R8 type.
taiwan Brand.china made.

[vishnu]

Do you have any new machines running in India. Please reply.

Vishnu

[high-side]

I would like to speak to you about purchasing an X6 or X7. I tried to PM but was unable to.
Please contact me at:

PSSEXTON at MI dot RR dot COM

Thank you,

Pat Sexton