I'm trying to get a warehoused machine up and running again. I have replaced the spindle amplifier and get mo1 alarms 0004 on x & z axis and 0005 on the y axis. I believe the problem to be in the parameters as I've checked the limit switches. The servo drives are in C mode upon intialization. Does anyone have a down load of parameters for this machine. Any help is great appreciated and needed!
Thanks GPL625
Thread: Mighty Comet vmc500-p
Results 1 to 3 of 3
-
04-21-2011, 03:01 AM #1
Registered
- Join Date
- Aug 2010
- Posts
- 0
Mighty Comet vmc500-p
-
04-10-2012, 03:29 AM #2
Registered
- Join Date
- Sep 2009
- Posts
- 53
Did you ever get your machine running? I am in desperate need of the tool change program, O9890, as mine just got erased in the control. Can you help me out?
-
04-12-2012, 08:01 AM #3
Registered
- Join Date
- Aug 2010
- Posts
- 0
Lost my shop space at friends shop. Machine is in storage for a while. Sorry !
Reply With QuoteSimilar Threads
-
Mighty Comet/Viper 1000 - communication
By czech in forum CNC Machining CentersReplies: 1Last Post: 07-27-2016, 05:44 PM -
Setting up Mighty Comet 1000 VMC
By rogerindigo in forum Mazak, Mitsubishi, MazatrolReplies: 2Last Post: 10-31-2014, 02:31 PM -
Mighty comet parameters VMC-750 needed/Spindle problem
By Petro in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 09-30-2010, 04:27 PM -
MIGHTY COMET MIDAS 320 CONTROLL
By joshuasalens in forum DNC Problems and SolutionsReplies: 3Last Post: 07-30-2009, 01:18 AM -
Mighty Comet with Meldas M0
By Bert10 in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 08-02-2008, 11:35 PM
Posting Permissions
