Hi,
I still have an Emco 340 built 1.986 with its original Sinnumerik control. I am getting repeatedly Alarm 13, checksum error in Z axis. The hydraulic unit will not even start because of this alarm. Both the Z axis servo and driver appear to be o.k. Any ideas what could be going on?
Thread: Emco 340 Alarm
Results 1 to 1 of 1
-
04-24-2011, 05:12 PM #1
Registered
- Join Date
- Sep 2008
- Posts
- 29
Emco 340 Alarm
Reply With QuoteSimilar Threads
-
(ALARM 414 SERVO ALARM) Y-AXIS DETECT ERROR?
By PICMAN in forum FanucReplies: 27Last Post: 02-09-2022, 05:10 PM -
ALARM shuttle drawbar alarm haas
By timmydabull in forum Haas MillsReplies: 28Last Post: 02-18-2013, 07:47 PM -
Alarm 409-servo alarm- z axis torque alm
By jessebpm in forum Hyundai KiaReplies: 3Last Post: 06-15-2010, 01:45 AM -
EMCO PCTurn55 and EMCO PCMill50
By lutiana in forum CNC (Mill / Lathe) Control Software (NC)Replies: 2Last Post: 10-06-2009, 03:05 AM -
DAEWOO 8 Steady rest pressure alarm, External feed hold alarm
By doubleeagle in forum Daewoo/DoosanReplies: 4Last Post: 06-12-2009, 09:15 PM
Posting Permissions
