[HelpNeededinWNY]

Hello,

I am trying to get my laser up and running after a controller failure. I have installed the new controller MPC6515, softdog driver, and LaserCut 5.3 but whenever I try to open LaserCut it tells me "plug in softdog and restart the software".

If I try to send a needed lasering text from CorelDraw 12 it gives me some Chinese I cannot read with MPC05LS.DLL in the middle.

I am at a loss and just wondering if I saved my necessary lasering from CorelDraw 12 to a zip drive could I then use the USB port to send it to the laser thereby bypassing the need to send it directly from either program?

Any help or advice is appreciated! I am really new to this and just trying to get my laser up and running to save orders.

Sincerely,
Mary

OS: Windows Vista
Controller: Leetro MPC6515 V4.1.2.5
Soft Dog: Green (Senseloc Elite-e V.2x) (showing in Smart Card Reader in Computer Management Device Manager)
Software - LaserCut53 and CorelDraw 12

[Pysiek]

Hey I have similar message: "plug in softdog and restart the software".
What is wrong?

[Pysiek]

I found my problem. My machine came with USB stick. It have to be pluged in