Wondering if the pendulum/control panel, is verticly adjustable on my new Haas TL3 lathe?
Was going to build up a "board walk" but herd a rumor that Imay be able to adjust the pendulum.
At 5`4" im getting tired of looking up at it. We dont currently have a Cad/Cam program so I am doing everything with IPS, and man is my neck sore!
Thread: pendulum
Results 1 to 4 of 4
-
05-13-2011, 01:25 AM #1
Registered
- Join Date
- Nov 2007
- Posts
- 50
pendulum
The road to hell is paved with good intentions
-
05-13-2011, 01:53 AM #2
Gold Member
- Join Date
- Jul 2005
- Posts
- 12177
I don't think it is height adjustable.
You should be happy you are not an old geezer like me who needs bifocals, not only do I have to look up I have to tilt my head back so I am looking 'down'.
An open mind is a virtue...so long as all the common sense has not leaked out.
-
05-13-2011, 09:53 PM #3
Registered
- Join Date
- Nov 2007
- Posts
- 50
Thanx for reply Geof, I do feel a little better! I guess we will just have to build up a platform!
The road to hell is paved with good intentions
-
05-14-2011, 12:31 AM #4
Registered
- Join Date
- Aug 2010
- Posts
- 579
+1 The height is not adjustable.
Originally Posted by Geof
It might be possible to lower the machine closer to the ground. Submit a picture of the leveling screws and the pads they are sitting on.Thanks,
Ken Foulks
Reply With QuoteSimilar Threads
-
Mike's Rodless Pendulum Clock Build
By Mike Everman in forum Wooden ClocksReplies: 11Last Post: 12-12-2010, 04:06 PM
Posting Permissions
