I bumped a tool into the chuck today, and got a shear pin error, I believe it was a 206 code. I looked ath e maintanence manual and the way they talk about it, sounds simple. Has anybody had any expirence with this? any advice?
Thanks
Results 1 to 3 of 3
-
06-01-2011, 10:29 PM #1
Registered
- Join Date
- Jul 2007
- Posts
- 41
LB 15 x axis shear pin replacement
-
06-01-2011, 10:51 PM #2
Gold Member
- Join Date
- Feb 2009
- Posts
- 6028
yes, it's simple. Make sure you get a real Okuma sheer pin ! Sometimes the second half of the broken one can be a pain to get out. You will need to re-set your X zero most likely.
-
06-01-2011, 11:03 PM #3
Registered
- Join Date
- Jul 2007
- Posts
- 41
Thanks for the info underthetire.
Reply With QuoteSimilar Threads
-
X axis ballscrew replacement
By gamila in forum FadalReplies: 2Last Post: 06-06-2015, 12:00 AM -
z axis linear bearing replacement
By dingo0722 in forum Linear and Rotary MotionReplies: 5Last Post: 10-12-2010, 11:38 PM -
Shizuko AN-S X Axis Ballscrew Replacement
By GTRClive in forum Linear and Rotary MotionReplies: 0Last Post: 02-01-2010, 07:34 PM -
Axis Motors Brush replacement
By Delw in forum FadalReplies: 11Last Post: 02-11-2009, 05:35 PM -
MV Jr. Z Axis thrust bearing replacement
By TWyatt9 in forum Mori Seiki lathesReplies: 0Last Post: 11-26-2007, 01:19 PM
Posting Permissions
