Moving a laser about 12 miles
I have a Weike 600x900 with a Reci 100 watt tube in it. I have to move it about 12 miles to a new shop. What precautions should I take apart from the obvious. Should I drain the tube(water chilled), remove and transport or leave intact and just make secure? tx
Results 1 to 2 of 2
-
06-12-2011, 12:05 AM #1
Registered
- Join Date
- Jul 2006
- Posts
- 83
Moving laser across town 12 miles
-
06-15-2011, 07:43 PM #2
Registered
- Join Date
- Mar 2011
- Posts
- 0
I think you must drain the tube. Don't take the risk to have a leak inside the machine.
I would say you have to remove the tube as manufacters do, since that's not a difficult task.
Reply With QuoteSimilar Threads
-
Miles
By MilesW in forum Mach Software (ArtSoft software)Replies: 1Last Post: 04-08-2011, 12:08 AM -
Tips on moving a co2 laser, anyone??
By tubeguy in forum Laser Engraving / Cutting Machine General TopicsReplies: 2Last Post: 03-15-2011, 08:49 PM -
LG1200 laser cutting and moving as soon as we turn it on
By KimberleyOz in forum Laser Engraving / Cutting Machine General TopicsReplies: 3Last Post: 03-17-2010, 03:42 AM -
Laser stops moving and burning half way
By CARTOGATE in forum Laser Engraving / Cutting Machine General TopicsReplies: 2Last Post: 08-28-2008, 03:46 PM -
Moving my Rabbit Laser from EU to Canada - Import regulations?
By glintid in forum Laser Engraving / Cutting Machine General TopicsReplies: 1Last Post: 05-20-2008, 04:00 PM
Posting Permissions
