Hello Everyone,
Does any one have a recommendation on where to buy Bipolar, MicroStepping, Stepper amp drives that can output 10 Amps at 70 to 80 volts?
Tech Support
CamSoft Corp.
(951) 674-8100
[email protected]
www.cnccontrols.com
Results 1 to 3 of 3
-
09-07-2005, 01:01 AM #1
Registered
- Join Date
- Apr 2003
- Posts
- 332
Need recommendation on where to buy Stepper drive
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
09-07-2005, 01:39 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
09-07-2005, 11:25 PM #3
Registered
- Join Date
- Apr 2003
- Posts
- 332
Thank you Gerry
That was very good of you and exactly what we needed.
Tech Support
CamSoft Corp.
(951) 674-8100
[email protected]
www.cnccontrols.com(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With Quote
Posting Permissions
