509,870 active members
4,349 visitors online
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Nov 2007
    Posts
    18

    Harig 612 grinder info

    I bought a used Harig 612 handfeed surface grinder with a "cable drive" that is not assembled. How does this thing work? I haven't figured it out yet. Also I would like to buy a manual for this machine, I'll pay any copying or shipping cost.

  2. #2
    Gold Member
    Join Date
    Apr 2006
    Posts
    3206
    Cable drive is for the table feeding left and right? Cable is wound around handwheel pulley, cable end attached to opposite end of table...all of this internally?

    In and out is leadscrew with marked wheel, as is up and down of grinding head...left and right is for power or handwheel feeding and no graduations..

Similar Threads

  1. Harig No. 1 Fixture
    By StuartTool13 in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 04-15-2011, 04:52 PM
  2. Millport Surface Grinder info
    By FUBAR62172 in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 06-01-2010, 09:37 PM
  3. Harig Won't Reverse
    By ranchak in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 04-21-2010, 04:34 AM
  4. Bp Harig Ez-Surf grinder manual
    By jketcham in forum Bridgeport / Hardinge Mills
    Replies: 2
    Last Post: 05-11-2008, 10:42 PM
  5. Clarkson t&c grinder : info needed
    By stragenmitsuko in forum Toolgrinding / Toolgrinding Machines
    Replies: 0
    Last Post: 08-29-2007, 03:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •