Hi Folks,

RhinoCAM Pro, a plug-in for Rhino 3.0, is ideal for the mold, die and tooling, woodworking, rapid-prototyping, and general machining markets.
RhinoCAM's new advanced toolpath-generation strategies now include 2½-, 3-, 4-, and 5-axis machining, suitable for the most sophisticated manufacturing requirements.

RhinoCAM Pro includes all of the features of RhinoCAM Basic plus:
Advanced stock model creation capabilities such as extruded, offset (to simulate castings), and modeled stock
Advanced tool definition including user-defined profiles
Advanced 2½-axis machining methods (advanced pocketing, profiling, and re-machining)
Advanced 3-axis milling strategies (re-roughing, pencil tracing, re-finishing, spiral, radial, and flat and steep area finishing)
Fourth-axis continuous, indexed machining including 4th-axis hole machining
Machining coordinate system for 5th-axis indexed machining
Advanced toolpath simulation and verification engine including part-stock graphical comparison
Graphical toolpath editor
Templates to store often used-operations
Free posts including a post-processor builder
Third-party utilities such as DNC, G-code editor, and viewer

Try it out at www.rhinocam.com

Download the demo from http://www.rhinocam.com/Products/RhinoCAMPro.shtml