Hi all,
I have a 2007 Citizen A20 that has started giving me Pneumatic Pressure alarms all the damn time.
At first I just thought it was a supply issue, but I put a little air tank with a check valve between the shop air supply and the machine, to make a little reservoir for the air pressure. It didn't really help.
I know that there is a pressure gage on the back of the machine, and if it drops below 17PSI, it will alarm. The alarm seems totally random, not just when blowing out a spindle or something (that would be easy to fix).
I was wondering if I am missing something here or of there is some way to diagnose the problem and figure out what I need to do so the pressure stops dropping so much.
thanks!