586,121 active members*
3,432 visitors online*
Register for free
Login

Thread: RFQ Small Guide Pieces

Results 1 to 2 of 2
  1. 06-27-2011, 08:21 PM #1
    aadrew10
    aadrew10 is offline Registered
    Join Date
    Apr 2010
    Posts
    59

    RFQ Small Guide Pieces

    Hello,

    I am looking to have 100 - 200 of these pieces made. The 16 surface finish is not mandatory, but the surface needs to be as smooth as reasonably possible.

    We have made many of these already, so good Mastercam files can be provided to lower the cost. We used .5 x .625 6061 aluminum bar cut to length.

    Thanks,

    - Andrew
    Attached Files Attached Files
  2. 06-28-2011, 08:09 PM #2
    aadrew10
    aadrew10 is offline Registered
    Join Date
    Apr 2010
    Posts
    59
    Bid Awarded.

    Thanks everyone
« Previous Thread | Next Thread »

Similar Threads

  1. Small job - MDF pieces - from SW file
    By JohnnyVegas in forum Employment Opportunity
    Replies: 2
    Last Post: 01-31-2011, 12:55 AM
  2. RFQ for 30 - 60 thousand small aluminum pieces.
    By porterico in forum Employment Opportunity
    Replies: 20
    Last Post: 01-13-2011, 02:35 PM
  3. Need Small pieces scanned
    By ArtistInFla in forum Digitizing and Laser Digitizing
    Replies: 6
    Last Post: 09-07-2010, 09:35 PM
  4. Small Prototype and Test Pieces
    By theclive1 in forum Employment Opportunity
    Replies: 0
    Last Post: 08-27-2010, 05:15 AM
  5. Small Aluminum rectangle pieces
    By TMaster in forum Employment Opportunity
    Replies: 6
    Last Post: 09-29-2008, 11:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules