I need help. I have a machine MAHO MH 432 CNC 700C with the German language. Does anyone know which parameter switches system to English.
thanks,
Boban
I need help. I have a machine MAHO MH 432 CNC 700C with the German language. Does anyone know which parameter switches system to English.
thanks,
Boban
I'm not sure for the 432 controller. On a 532, it's parameter 5. Set to 1 for English.
Hello.
We have a maho 532 machine. I have found the parameter 5 for language change and is 1 = english. My question is how to apply the change? Now it is set to 0=german
Do you have an english manual for the machine?
Thank You!
To change machine constant (parameter) do this:
1. Press emergency stop.
2. Go to constant screen and press softkey that says "operate MC"
3. Change machine constant 80, from "0" to "1".
4. On 432 control press "MANUAL" button. On 532 control press "PROCESS".
5. Wait for control to re-boot.
6. Go back to "constants" screen.
7. Press the "EDIT MC" softkey.
8. Go to constant 5 and change it to 1 (or any other number for different language).
9. Go back to constant 80 and make it 0 again (you must do this or machine won't start)
10. Press "MANUAL" or "PROCESS" again to re-boot.
Machine will now speak a new language.
Thank you for the quick reply.
I have tried to do as you say, but the machine does not restart after changing parameter 80 to 1 at step 3.
Do you have an electronic manual for the machine?
Read my instructions carefully.
Parameter 80 MUST be 0
Machine will not start if 80 = 1 !!
I have read your instructions correct. But at step 3 you say to change parameter 80 from 0 to 1. I did that but after pressing 1 and process, the control did not reboot, so i could not go to the next step.
Also, you must press ENTER key , then STORE softkey after you enter a value for a parameter.
Salut tout le monde,
Comme quand je peux, je scanne mes documents MH600C.
Mon ami TiDav le télécharger ici:
By the way, you can find constants.
I enjoy be with you, this is my first day on this brotherwood.
Hi everybody,
I have made mistake in my first post !!!!
I scan, when I have some time, my MH600C documents.
My friend TiDav upload it here :
Documents MAHO / CNC 432 : Phillips
By the way, you can find constants.
I enjoy be with you, this is my first day on this brotherwood.
settings are the same for all 432 command
According to my info MP80 is for your gearbox.
I dont think a CNC432 has got a choice for language.
With these old controls the language is burned on a eeprom.
Here is a list of machine constants for the cnc432.
If your cnc432 is a old philips control from the 80's
i just bought two lathes from china and the screen displays are in chinese. Does anyone know how to help me change this setting. My models are as follows.
1.Spark CKL800D CNC LATHE
2. CKA6180 CNC LATHE 800X5000
hello , i tryed the same to change the language but i'm not able to change parameter 80 from 0 to 1 ? what can be te reason?
Pls send your MAHO 700 parameterlist (Machine constats list)to me
Greetings from
Mercedes
Email : [email protected]