I am wondering if anyone knows a way to "match" tool height offsets on a 200p-m okuma controller. I have a 4 station (identical parts) set-up with 4 separate g15's. The issue I am having is with 2 tools that HAVE to remain in relation to each other. The night shift will adjust 1 tool height as needed and not the other creating a lip in the part. I would love to say posting the information, or more training would work, but it is constantly overlooked creating alot of rework on the parts. So the big question is how to create another height offset which will effect 2 tools. If anyone has an answer I would greatly appericate it.