[vksingh]

Hi Everyone,
Thanks for the support that each and every one is providing.
I have purchased a second hand machine for cutting acrylic and Balsa.
The Problem is as follows.
1. I do not have any manual for this machine.
2. I would also like to engrave with this machine, but no prior knowledge on cutting and engraving.

I would like you all to help me start cutting and engraving on this machine.
Note: This machine was purchased new in year 2009, and i have purchased it last month.

For others i would post more pictures of this machine.

[Walter007]

Hi,
Hope I can help you. I recongnize a seller who sales ymlaser in india,his MSN is [email protected].I think He can provide the information you want.

Besides, our company is a laser equipment manufacture in china ,if you are interested in our products, please contact me freely or visit our website at where there are laser,there are hanzlaser_Artworldcn Enterprise ltd offer competitive products
My MSN:[email protected].

[zz183613]

Hi Everyone,
Thanks for the support that each and every one is providing.
I have purchased a second hand machine for cutting acrylic and Balsa.
The Problem is as follows.
1. I do not have any manual for this machine.
2. I would also like to engrave with this machine, but no prior knowledge on cutting and engraving.

I would like you all to help me start cutting and engraving on this machine.
Note: This machine was purchased new in year 2009, and i have purchased it last month.

For others i would post more pictures of this machine.

why dont you directly contact with the manufacturer?

[lu4dmg]

hola pudiste solucionar el problema yo compre una igual y no tengo los driver de la maquina