Hi, I have a Daewoo Puma 8S with an OT-C 95' model. Is there anyone that can help with a parameter list. Please respond ASAP. Thanks!
Hi, I have a Daewoo Puma 8S with an OT-C 95' model. Is there anyone that can help with a parameter list. Please respond ASAP. Thanks!
Contact your local Doosan dealer they will be able to contact the manufacturer
************************************************** *********
*~~Darwinian Man, though well-behaved, At best is only a monkey shaved!~~*
************************************************** *********
*__________If you feel inclined to pay for the support you receive__________*
*_______Please give to charity https://www.oxfam.org.au/get-involved/_______*
************************************************** *********
Here is a link to photobucket, i have downloaded a screen shot of each page displayed on my 1995 Daewoo puma 8s with a Fanuc OT-C control.
Hope this helps!!
1995 Daewoo Puma 8s parameters pictures by mroy0404 - Photobucket
mroy0404
Dude you ROCK!!! THANKS A MILLION!!!
Chuck
Hey there, I have a Daiwoo Puma 10hc with Fanuc ot-c controller and it only has type 1 roughing, and apprantly parameter 923 can change this to type 2, what is the parameter setting, any help would be greatly appreciated.