Hi
I have just started to play around with Kcam and use autocad to do my drawings, when importing DXF Kcam will not cut the arc's just does a line is there anything I have to do to get the arc's cut either in Kcam setup or Autocad
thanx John
Hi
I have just started to play around with Kcam and use autocad to do my drawings, when importing DXF Kcam will not cut the arc's just does a line is there anything I have to do to get the arc's cut either in Kcam setup or Autocad
thanx John
:cheers:Try using Acad drawing and save as an R12 DXF file.
I have the same problem, but use Turbo Cad 18 Platinum, I don't know how to save in R12 DXF.