[tiburnok]

Can anyone help a newbie here. I have a V23 BCC and im doing my first 3d with splice planar. Im just following the tutorial on 3d machining and when i tried to compute tool path an error pop-up saying "Access Denied". Had anayone encounter this error? Any help will be appreciated. Thanks in advance

[BurrMan]

There is a patch for that issue:

http://www.bobcadsupport.com/tech//B...23%20Patch.exe

But before you download and run it, what build are you running? Open BobCad and go to help menu-about BobCad..

This is an old build issue. The latest build is 1812...

It would also appear if you are running in Demo mode. Help menu- License. See if your license data is listed in there....

Where did you get your installation from? Be sure to run a full install first, then update to the latest build.. If you are not sure what this means or how to do it, reply here and we can tell you how.

[tiburnok]

Hi Burrman,

My BCC software build is 1205. I installed it from the installation CD. Im using an USB license. Should i installed the patch?

Thanks for the reply

[tiburnok]

BurrMan

I installed the patch Build 1595 and it is working now.

Thanks again for the info

[BurrMan]

Hey Tiburnok,

Yeah, 1205 was a long time ago.. Just so you know, the latest build is 1812, found here:

BobCAD-CAM | CAD-CAM Software for CNC Machines including: Mill, Lathe, Wire EDM, Laser, Plasma, Waterjet, Routers and much more.

Good luck.