Hello all. I am new to this forum and I hope I am posting in the right section. I am in the process of building a CNC pipe/tubing cutter. Basically one axis that goes along the length of the pipe and an indexing axis. I need to find some simple inexpensive software to do this.. I have a gecko G540 drive. I've read some places that people are using a round stock plug in for mach 3 but can not find it anywhere. Any advise would be awesome. Thanks!
Results 1 to 4 of 4
-
07-07-2011, 11:42 PM #1
Registered
- Join Date
- Jul 2011
- Posts
- 12
Looking for software running g540
-
07-08-2011, 03:12 AM #2
Registered
- Join Date
- Jul 2011
- Posts
- 12
Also I am looking to cutt out just simple pipe tie ins and holes for fittings
-
07-08-2011, 04:14 AM #3
Registered
- Join Date
- Jun 2009
- Posts
- 2
Talk to Tom from CandCNC...aka Torchhead on the forum he has a plugin for round and square cutting.
-
07-08-2011, 08:53 PM #4
Registered
- Join Date
- Jul 2011
- Posts
- 12
thanks for the reply. I'll give him a shot
Reply With QuoteSimilar Threads
-
Running comedi (data acquisition) with EMC2 software
By uoayhe in forum LinuxCNC (formerly EMC2)Replies: 1Last Post: 07-17-2009, 01:51 AM -
What is the preferred xml file to use on a G540 running a plasma table?
By jerryrigge in forum Gecko DrivesReplies: 1Last Post: 05-05-2009, 08:11 PM -
g540 with quickstep software
By meck11 in forum Gecko DrivesReplies: 4Last Post: 04-01-2009, 08:54 PM -
Running newer software
By Bushytails in forum FlashCut CNCReplies: 1Last Post: 11-03-2008, 01:15 AM -
Programming Tricks wanted for Running Acromill v1.15.2 software w/o controller Card?
By ohallock in forum Uncategorised CAM DiscussionReplies: 1Last Post: 03-04-2006, 08:40 PM
Tags for this Thread
Posting Permissions
