About a month ago I contacted Procutcnc.com a division of TMI a vendor here And talked with Rob Gaskins. He was very helpful and answered all my questions. We talked for about an hour.
He set me up with a GK4400 Gantry Kit. ProCutCNC.Com Tel:763.315.5019
I also added the.
gv540 300 oz. motor package.
Thc 300b Torch height Control.
6" Z axis
Hand Held Torch Mount.
Bobcad V21 And Mach 3 Package
For a total of just a little above $4000
The steel I ordered from Modesto Steel.
4 Sticks 2'X2' square tubing.
1 4'X8' Sheet 14 Gauge Sheet metal.
6 Sticks 4" X 14 Gauge Flat Stock.
1 Stick 2" X 1/8" Flat Stock.
1 12" Stick 3" X 1/4" Cold Rolled Steel.
For a total of around $500.
The reason I went with Procut CNC was price and options.
I really did not see anyone else selling a quality table with fully licensed software and ATHC for under $5000.