Hey all!
I bought Vectric Cut2D a few days ago and have been having a weird problem with it...
If I create a square that is 4"x4" and then create an outside profile toolpath for it, the square consistently comes out at 3.95"x3.95".
I'm cutting MDF and I initially thought this was something to do with the material, but upon double checking any pockets cut are the right size to a tolerance of about .004
If I create an inside profile toolpath for the same 4"x4" square I get a cutout that is 4.05"x4.05"...
I'm really not sure why this would be happening, the tool setup is correct and I can't seem to see any other problems. The fact that the pockets are the right size is the weirdest part...
Anyone have any idea about what might be going on?