Hey everyone! I'm needing help using a Greco System to load the G-Codes into the 1050. I checked the parameters of the Greco System, I'm pretty sure everything on the machine is set to what it needs to be on, and still no activity light on the Greco CNC Station box. I'm not to sure as to what else to do with it. If anyone has any suggestions, please feel free to pm me or respond to my post. I'm needing help asap!!
Thanks for looking!!
Results 1 to 3 of 3
-
07-12-2011, 10:35 PM #1
Registered
- Join Date
- Jul 2011
- Posts
- 0
GE 1050 Mark Century loading using Greco System!!
-
07-12-2011, 10:37 PM #2
Gold Member
- Join Date
- Feb 2009
- Posts
- 6028
There is actually still one of those things running? Our last one died 2 years ago. Check with a light box make sure your comm port is not smoked.
-
07-13-2011, 03:52 AM #3
Registered
- Join Date
- Jul 2011
- Posts
- 0
I will be sure to check that tomorrow. We now do the programs with software on the computer, but don't have the right plug to transfer the programs from the laptop to the tape reader. If you think of anything else it can be, please let me know and I'll be sure to post if the port is working properly.
Reply With QuoteSimilar Threads
-
GE Mark Century 2000 Manual
By RDMoore in forum G-Code ProgramingReplies: 3Last Post: 03-05-2016, 09:27 PM -
old machine mark century 1050 monarch 150
By Imm in forum MastercamReplies: 6Last Post: 10-15-2010, 07:12 PM -
ge mark century 550 memory battery
By Daniel Wilcox in forum Controller & Computer SolutionsReplies: 0Last Post: 11-15-2009, 06:57 AM -
Mark Century 2000 Dnc Problem
By ozgurm in forum DNC Problems and SolutionsReplies: 5Last Post: 02-18-2009, 06:22 AM -
GE 1050 mark century N17 error
By eastpaman in forum News AnnouncementsReplies: 3Last Post: 01-21-2009, 03:42 PM
Posting Permissions
