Rovi Products Inc is now offering a 5C Lever Collet Closer to Fit the Haas Tool Room lathes.



Optimize your TL-1 or TL-2 lathe with our 5C Hand Lever Collet Closer!

These units come complete, ready to install. The spindle bore is straight on the Haas tool room lathes, therefore we can not use the tapered style spindle adapter. Instead, we use a 5C Collet Chuck with a 2-3/16-10 thread nose. This allows usage of the Hardinge® 5C step chucks as well as face plates. The TL-1 lathe has a (A5) spindle and the TL-2 has a (A6)

Once installed, you can quickly change from your collet system to Chuck, with in minutes.

For More info contact us: 800-423-5245 www.roviproducts.com