Hi, Looking for a electrical manual for Miyano JNC 60 with fanuc OTa control. Any help will be appreciated.
Mike
Hi, Looking for a electrical manual for Miyano JNC 60 with fanuc OTa control. Any help will be appreciated.
Mike
Hey guys I have a Miyano JNC 60 with a FANUC OTA control.
I have turned on my machine and can run the machine in Jog mode.
As soon as I try to run the Spindle in MDI mode the machine gives an alarm.
I am sure its an interlock. I cant figure it out as I have no ladder diagram for this machine.
Can someone please help with the ladder diagram for this machine which shall help me clear up
any interlocks. Thanking you in advance.
i can email you the ladder and EC if u ra will to bare the cost of scanning the books
this machine will not display the msg on the screen the type of alarm should be determined through diagnostics
I am willing to bare the cost for you to scan and send me the ladder/electrical diagram for the machine.
Please let me know what you want to charge and how do you want me to pay you.