Paul what a super message board. We're on the home stretch on getting our Sherline mill converted to CNC. It's been a learning process for sure. We have the electronics background, but tinhorn to machines, and CNC. There is so much information that's it's mind boggleing. Keep up the good work Paul..
Thanks
Joe MC
Houston, TX
http://www.houstonsteelman.com
Thread: Howdy
Results 1 to 6 of 6
-
07-31-2003, 08:48 PM #1
Registered
- Join Date
- Jul 2003
- Posts
- 1
Howdy
Joe MC
Houston, TX
www.houstonsteelman.com
-
07-31-2003, 08:57 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 6855
Thank You and Glad to have you aboard!
-
07-31-2003, 10:24 PM #3
Registered
- Join Date
- May 2003
- Posts
- 146
:wave:
Wee aim to please ... You aim to ... PLEASE.
-
08-01-2003, 06:31 AM #4
Gold Member
- Join Date
- Mar 2003
- Posts
- 507
Welcome to CNCzone Joe MC!
I hope that you will have lots of fun here & also share & learn a lot here......
Klox*** KloX ***
I'm lazy, I'm only "sparking" when the EDM is running....
-
08-01-2003, 03:10 PM #5
Registered
- Join Date
- Apr 2003
- Posts
- 1876
Welcome to the Zone!
'RekdMatt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
08-02-2003, 11:52 AM #6WallCrawler Guest
Welcome.
Reply With QuoteSimilar Threads
-
BobCAD?
By BPT in forum BobCad-CamReplies: 73Last Post: 06-21-2005, 06:39 AM -
Meet Captain Howdy!
By samualt in forum CNC Wood Router Project LogReplies: 8Last Post: 11-09-2004, 09:59 AM
Posting Permissions
