I need install Patrol Light Control RED, GREEN, YELLOW.
I have the lamps. But I cannot find this signals on electric
inside. I know how on PUMA 250/300/400. But I don't know
what I have to do with old PUMAs. Is it possible?
I need install Patrol Light Control RED, GREEN, YELLOW.
I have the lamps. But I cannot find this signals on electric
inside. I know how on PUMA 250/300/400. But I don't know
what I have to do with old PUMAs. Is it possible?
6S OT-C - uses
Y51.0 = YELLOW
Y51.1 = GREEN
Y51.2 = RED
TO 24M for the relay coils
10HC OT-C- uses
Y51.0 = GREEN
Y51.1 = YELLOW
Y51.2 = RED
TO L+ for the relay coils
************************************************** *********
*~~Darwinian Man, though well-behaved, At best is only a monkey shaved!~~*
************************************************** *********
*__________If you feel inclined to pay for the support you receive__________*
*_______Please give to charity https://www.oxfam.org.au/get-involved/_______*
************************************************** *********
Thank you for your help.
I found this. The connectors were hide.
Y51.0 = YELLOW = PTY
Y51.1 = GREEN = PTG
Y51.2 = RED = PTR
After install the relays
I can use this signals.
Settings for shut up this light
Diagnostic parameter X0001=00000111
It is right?
Please give me parameter # for shut up this light.
Thank you. Don't need help.
Diagnostic param # Y0051=00000111
This parameter is output signals.
Where is shut up this light?
I don't have the signals GREEN, YELLOW, RED
on wires PTG, PTY, PTR during PUMA'S work.
Done. Finish. This parameter is D0444 = 00000111.
No finish. This parameter D0444=00000111
working only for PUMA 6S. Need help.
Who knows this one for PUMA 10HC?
D0444 for PUMA 10HC no working.
D304.0 = Red
D304.1 = Yellow
D304.2 = Green
************************************************** *********
*~~Darwinian Man, though well-behaved, At best is only a monkey shaved!~~*
************************************************** *********
*__________If you feel inclined to pay for the support you receive__________*
*_______Please give to charity https://www.oxfam.org.au/get-involved/_______*
************************************************** *********
D0304 no working.
Maybe D0310?
Yes. D0304. Something wrong with electric.
Thank you.
PUMA 10-HC NC LATHE s/n 880064
Date - May 26, 1993
I reset parameter D304 = 00000111
Patrol light permanently YELLOW.
No GREEN after start PUMA.
Diagnostic Y050.0 = RED regarding electric diagram
Diagnostic Y050.3 = GREEN regarding electric diagram
Diagnostic Y050.5 = YELLOW regarding electric diagram
On screen only 00000001 (RED???)
Need help.
You need to look through the Ladder diagram specifically at the address list the D bits will be listed in this...
D304.0 = Red
D304.1 = Yellow
D304.2 = Green
According to my Electrical diagram
10HC OT-C- uses
Y51.0 = GREEN
Y51.1 = YELLOW
Y51.2 = RED
TO L+ for the relay coils
But obviously this could be different on your machine
You first stop is to check your ladder print out or the ladder on the machine.
GL
************************************************** *********
*~~Darwinian Man, though well-behaved, At best is only a monkey shaved!~~*
************************************************** *********
*__________If you feel inclined to pay for the support you receive__________*
*_______Please give to charity https://www.oxfam.org.au/get-involved/_______*
************************************************** *********
Yes.
According electric diagram for my machine
D304.0 KPLRD PATROL LIGHT RED
D304.1 KPLYN PATROL LIGHT YELLOW
D304.2 KPLGN PATROL LIGHT GREEN
But output parameter
Y050.0 PTR.R PATROL LIGHT RED
Y050.3 PTG.R PATROL LIGHT GREEN
Y050.5 PTY.R PATROL LIGHT YELLOW
Y051.0 SRY.S SPINDLE SERVO READY
Y051.1 SFR.S SPINDLE FORWARD
Y051.2 SRV.S SPINDLE REVERSE
I don't understand to explain this.