we are having trouble trying to calibrate the back gage. get error help 70...
any ideas? thanks in advance
Thread: cnc 99 "autogage"
Results 1 to 1 of 1
-
08-30-2011, 05:20 PM #1
Registered
- Join Date
- May 2005
- Posts
- 31
cnc 99 "autogage"
Reply With QuoteSimilar Threads
-
How to "offset" Double sided PCB if I don't have abolute "home" on my CNC ?
By Calico in forum PCB millingReplies: 12Last Post: 06-27-2012, 12:30 PM -
"motor steps per resolution" and "driver microstepping" settings
By margni74 in forum LinuxCNC (formerly EMC2)Replies: 9Last Post: 10-24-2009, 08:33 AM -
"J" head type "millport"(tiwan,1980) clutch
By marksbug in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 08-17-2009, 04:48 PM -
"Warco GH Univ" V "Chester Lux Mill"
By JQ_Quint in forum Benchtop MachinesReplies: 37Last Post: 01-22-2009, 05:59 PM -
G320 "common" or "+5vdc" why do they vary?
By beezerlm in forum Gecko DrivesReplies: 3Last Post: 01-12-2008, 11:00 PM
Posting Permissions
