Hello.
I got a step file, and would like to mill the S part you can see in the picture. My problem is that every time I calculate the tool-path I get the tool-path that is not smooth and has some bigger mistakes (in the picture in red circles).
I tried to do the job with a 2.5mm tool with 1.25mm corner radius using Z level rough, 0.1 depth of cut, 1mm step-over.
Picture:
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Here you can download the bobcad file I made with tool-paths:
http://www.4shared.com/file/g5xXmNpO/Bcadfile.html
And here is the original step file:
http://www.4shared.com/file/Y9m7Gac9/originalstep.html
Hope the links work?
(Updated the links, do they work now?)
Is there an error in step file geometry, problem on bobcad side, or on my side (choosing the correct parameters?).
Any help will be appreciated.