Originally Posted by
mmedina
Hi fellow Dyna users, I have some parts for sale. Half of these parts are from my own machine – the other half are from another Dyna owner who retrofit his machine a few years ago. All of the parts listed below were working when pulled from the machines.
I‘ll keep the shipping costs reasonable on all items. PM me for more info.
Dyna Main Controller (the Programmer/Operator Interface Panel)
Model 4400/01CE
$200 - Two available
Stepper motor driver boards
$50 – EIGHT available
Part #s “P/N DR-217 REV.5” and “P/N – 4X00-DR-REV.5”
Lambda Power supply (the small grey one)
Model VST-4-522
Input: 170 to 250 VAC, or 230-330VAC
Output:+5V, +12V, and -12V
$50
Dyna Controller module
Part # 4X00-CM-224-Rev.1
$50
Dyna Spindle controller
Part # SP-222-Rev.1
--with EPROM chip
$50 - 2 available
--without EPROM chip
$35 - 1 available
Dyna 4400 Spindle brake board
Part #7100-00021
$25 each - Two available
X,Y, or Z Axis Stepper connection board
$15 each - 3 available
Again, PM me if you are interested. I might post a few additional items as I dig them up.