i am trying to download / upload files from tosnuc control on a toshiba NX-76 machine. when i use floppy drive available there, it shows a message" can't make file". also using RS232 port message pops as " dump name".
is there any special format i have to enter data to load files.
Results 1 to 2 of 2
-
08-26-2011, 01:52 PM #1
Registered
- Join Date
- Aug 2011
- Posts
- 0
toshiba NX-76 with Tosnuc control
-
07-03-2012, 08:43 PM #2
Registered
- Join Date
- Oct 2011
- Posts
- 4
When loading a file from a floppy, you need to respect the file name format.
Originally Posted by arwinder
That could 8 alpa-numerical with NO extention.
If that is not the issue, it is possible the drive maybe bad.
As fair and the "Dump name" that is normal for the T-888.
Reply With QuoteSimilar Threads
-
1988 fadal 2040 with toshiba G7ASD control
By dwolf in forum Controller & Computer SolutionsReplies: 0Last Post: 08-21-2011, 06:38 PM -
tosnuc 777 control
By SIMONB in forum G-Code ProgramingReplies: 4Last Post: 05-06-2011, 02:28 PM -
tosnuc 600
By sanjaya putra in forum DNC Problems and SolutionsReplies: 1Last Post: 12-01-2010, 03:50 AM -
Need boards for a Toshiba Tosnuc 600M!
By cacrawfo in forum CNC (Mill / Lathe) Control Software (NC)Replies: 2Last Post: 02-02-2010, 12:16 AM -
Tosnuc 800 (Toshiba)
By CNCONLINE in forum Community Club HouseReplies: 0Last Post: 02-11-2009, 02:28 AM
Posting Permissions
