Hello, I have a Kollemorgen Servostar CD CR6xxxx. This is a resolver position, AC driver unit that uses 110/220 VAC and can be used for up to 2.2kw 3ph AC motor. I have a Yaskawa SGMSH-20A motor (3ph 2.0kw) that I am going to use for this. I have already removed the Inc Encoder and purchased a Tamagawa TS2013N6xxx resolver and have completed the connections. To include a quadruple check for issues and loose wires, there are none. I'm in the middle of setting up the Motionlink software for this combo.
My issue is that when I get to resolver calibration and I set everything to the "Zero" position and I turn the resolver 180 degrees the software thinks its actually turned 360 degrees. So for every 1 turn the driver thinks its turned 2. I've already thought that it might be the number of poles, so I changed it from "2" to "4" and the issue is still the same. I'm actually at a loss right now as to how to get the software to play nice with the hardware. If anyone knows what I might be missing I would greatly appreciate your help?
I know this is a very abstract issue having all of the differing combination of parts from different manufacturers. I've gone though all the manuals and searched on the net and still have not found anything. I just thought maybe someone here has set up a Servostar with the Motionlink for a resolver before. Thanks for any help!
SFL