Made some progress today. Seems the machine has a 2 part problem. Only related to a power failure that happened last week. Killed the power supply and also corrupted WinMax (Hurco software).
I did get the power supply to work so far. I will be posting photos. I used a PC power supply from Best Buy. I also found out that our Hurco does not use the -5 vdc or the PG signal wire.
I also used a Phoenix Contact 5 amp 24vdc power supply(info here http://rd.phoenixcon.com/products/in...3127_00_en.pdf ). I had this one in house rather than ordering a 10 amp and having to wait. Hopefully, the 5 amp will be enough.
Now onto the software issue...
Jonathan M. DeLong
www.JexMfg.com