Good news: First day on new job! Now: Get the Arrow that has been setting three years going and you will have a nice machine to work with.
I have experience with Hurco and Boss 9 but not the Arrow so I am going to need alot of help so please bear with me. Here are machine details:
s/n: 7049-AOB-98-059
control diagram: 91203577
VFS5 Vickers model 275/26004 A-10 rev7
BDS4 model 210 23 415 V32 (3 units )
Vickers Arrow Output Board 1000 8K
and I got a stack of GibbsCam disks, A2100 version 5.56, base disk plus disk 1 thru 14.
Powered up and got "cmos checksum invalid" and "cmos time and date not set"..... (it is NT v4 svc pack 3). Whent in to set-up and set time and date but it loses it after power down and back up. Exit set-up and boot up and I get a screen with fine vertical stripes and a 1" square icon of some sort in center of screen and thats it...
ANY IDEAS???